Polarization Maintaining PM Fiber Patch Cable, FC/APC FC/UPC LC/SC, 405–1550nm
- High-birefringence polarization maintaining single-mode fiber
- High Polarization Extinction Ratio (PER) for polarization-sensitive optical systems
- Standard slow-axis alignment to connector key
- 405, 488, 532, 635, 780, 850, 980, 1064, 1310 and 1550 nm options
- FC/APC and FC/UPC connectors recommended for precision PM applications
- LC, SC and hybrid connector configurations available
- Low insertion loss and high return loss
- Custom fiber type, wavelength, length, connector and polarization-axis orientation available
Polarization Maintaining Fiber Patch Cable for Precision Optical Systems
COMNEN Polarization Maintaining (PM) Fiber Patch Cables are designed for optical systems where maintaining a defined state of linear polarization is critical. Using high-birefringence PM fiber and precision connector termination, the cable minimizes coupling between the two orthogonal polarization axes and provides stable polarization transmission when the input polarization is correctly aligned with one of the fiber’s principal axes.
The patch cables are available for wavelengths from the visible spectrum through near-infrared and telecom bands, including 405 nm, 488 nm, 532 nm, 635 nm, 780 nm, 850 nm, 980 nm, 1064 nm, 1310 nm and 1550 nm.
COMNEN can manufacture standard and customized PM patch cords with FC/APC, FC/UPC, LC, SC and hybrid connector combinations, different cable lengths and jackets, as well as specific polarization-axis alignment requirements.
They are suitable for coherent optical communication, fiber lasers, interferometers, fiber-optic gyroscopes, optical sensors, modulators, measurement instruments and other polarization-sensitive photonic systems.
Why Use Polarization Maintaining Fiber?
Standard single-mode fiber can transmit polarized light, but mechanical stress, bending and temperature variation may cause energy to couple between different polarization modes.
Polarization Maintaining Fiber is intentionally designed with strong birefringence so that two orthogonal polarization modes propagate with different effective refractive indices.
When linearly polarized light is launched along either the slow axis or fast axis, coupling between these two polarization modes is minimized.
This makes PM fiber particularly useful in systems where polarization stability directly affects optical power, interference visibility, modulation performance or measurement accuracy.
Important
PM fiber does not automatically convert arbitrary input light into perfectly polarized light.
For optimum polarization extinction ratio, the input polarization must be correctly aligned with one of the principal polarization axes of the PM fiber.
High-Birefringence Polarization Maintaining Fiber
COMNEN PM patch cables use high-birefringence polarization maintaining fiber designed to maintain a stable polarization state in polarization-sensitive optical systems.
The PM fiber uses a controlled birefringent structure that creates two orthogonal principal polarization axes.
These two principal polarization axes are:
- Slow Axis
- Fast Axis
This high-birefringence structure provides excellent polarization-maintaining performance and is suitable for precision connector termination, splicing and integration into optical devices.
Precision Polarization Axis Alignment
Slow Axis Aligned to Connector Key
For standard COMNEN PM fiber patch cords, the slow axis is aligned with the connector key.
This provides a repeatable mechanical reference for connecting polarization-sensitive components.
When two properly aligned PM connectors are mated, the mechanical key helps maintain the orientation of the polarization axes.
Standard Configuration
Connector Key → Slow Axis
Custom Configurations
COMNEN can also manufacture:
- Fast-axis-to-key alignment
- Custom polarization-axis angle
- Slow-axis to slow-axis
- Fast-axis to fast-axis
- 90° crossed-axis configurations
- Customer-defined axis orientation
These configurations should be specified when ordering.
High Polarization Extinction Ratio
Polarization Extinction Ratio, commonly abbreviated as PER, indicates how effectively the fiber assembly maintains polarization along the intended axis.
A higher PER indicates lower coupling of optical power into the unwanted orthogonal polarization axis.
COMNEN offers different PER grades depending on wavelength, fiber type, connector and cable configuration.
Standard Grade
PER ≥20 dB
High-PER Options
≥23 dB / ≥25 dB or higher configurations available upon request
For applications requiring particularly high polarization stability, the required PER should be specified before ordering.
Low Insertion Loss
Precision fiber termination and polishing help minimize optical loss at each connector interface.
Typical COMNEN PM patch cable configurations are designed for:
Insertion Loss: ≤0.50 dB
Lower-loss configurations may be available depending on:
- Operating wavelength
- Fiber type
- Connector type
- Connector polishing method
- Cable length
Individual test requirements can be specified for OEM and laboratory applications.
High Return Loss
FC/APC connectors are recommended when optical back reflection needs to be minimized.
Recommended performance targets:
| Connector Polish | Return Loss |
|---|---|
| UPC / PC | ≥50 dB |
| APC | ≥60 dB |
FC/APC is particularly suitable for lasers, interferometers, coherent systems and other applications sensitive to reflected optical power.
Available Operating Wavelengths
COMNEN can provide PM fiber patch cables optimized for different wavelength ranges.
| Nominal Wavelength | Typical Application |
| 405 nm | Violet lasers, spectroscopy, instrumentation |
| 488 nm | Argon-ion / blue laser systems, sensing |
| 532 nm | Green lasers, measurement systems |
| 635 nm | Visible red laser systems |
| 780 nm | Atomic physics, spectroscopy, sensing |
| 850 nm | Optical sensing and instrumentation |
| 980 nm | Pump lasers and optical amplifiers |
| 1064 nm | Nd and fiber laser systems |
| 1310 nm | Optical communication and sensing |
| 1550 nm | Telecom, coherent optics and interferometry |
Other PM fiber wavelengths are available depending on project requirements.
Connector Options
FC/APC
FC/APC is the preferred connector for many high-performance polarization-maintaining applications because of its:
- Threaded mechanical connection
- Accurate rotational positioning
- Low optical back reflection
- Good repeatability
- Stable polarization-axis alignment
FC/UPC / FC/PC
FC/UPC is suitable when precise mechanical positioning is required but APC polishing is not necessary.
LC and SC
LC and SC connectors can also be supplied for PM systems where equipment density or interface compatibility is important.
Available Configurations
- FC/APC to FC/APC
- FC/UPC to FC/UPC
- FC/APC to FC/UPC
- FC/APC to LC/APC
- FC/APC to LC/UPC
- FC/APC to SC/APC
- FC/APC to SC/UPC
- LC to LC
- SC to SC
- Hybrid PM fiber patch cables
- Connector to bare fiber pigtail
- Custom connector combinations
Product Specifications
| Parameter | Specification |
| Product Type | Polarization Maintaining Fiber Patch Cable |
| Fiber Type | Polarization Maintaining Single-Mode Fiber |
| Fiber Structure | High-Birefringence Polarization Maintaining Fiber |
| Nominal Wavelengths | 405 / 488 / 532 / 635 / 780 / 850 / 980 / 1064 / 1310 / 1550 nm |
| Custom Wavelength | Available |
| Connector Types | FC/APC, FC/UPC, LC/APC, LC/UPC, SC/APC, SC/UPC |
| Hybrid Connector | Available |
| Standard Axis Alignment | Slow Axis Aligned to Connector Key |
| Fast-Axis Alignment | Optional |
| Custom Axis Orientation | Available |
| Polarization Extinction Ratio | ≥20 dB Standard |
| High-PER Option | ≥23 dB / ≥25 dB or customized |
| Insertion Loss | ≤0.50 dB, depending on configuration |
| Return Loss – UPC | ≥50 dB |
| Return Loss – APC | ≥60 dB |
| Fiber Cladding Diameter | Typically 125 μm, depending on selected PM fiber |
| Buffer / Cable Diameter | 0.9 mm / 2.0 mm / 3.0 mm or custom |
| Cable Jacket | PVC / LSZH / Custom |
| Standard Length | 0.5 / 1 / 2 / 3 / 5 m |
| Custom Length | Available |
| Configuration | Simplex |
| Connector Ferrule | Ceramic Ferrule |
| Operating Temperature | -20°C to +70°C typical |
| Storage Temperature | -40°C to +85°C typical |
| Compliance | RoHS upon applicable configuration |
| Custom OEM Assembly | Available |
Note: Optical parameters depend on the selected PM fiber, operating wavelength, connector type and termination configuration. Final specifications should be confirmed according to the required part number.
Key Features
High Polarization Stability
High-birefringence PM fiber minimizes polarization-mode coupling and maintains polarization when light is correctly launched along the fiber’s principal axis.
Precise Axis Orientation
Precision termination controls the orientation between the PM fiber’s polarization axis and the connector key.
High Extinction Ratio
Standard and high-PER assemblies are available for demanding polarization-sensitive applications.
Low Optical Loss
Precision polishing and fiber alignment help achieve low insertion loss.
Low Back Reflection
FC/APC configurations provide excellent return-loss performance for reflection-sensitive optical systems.
Wide Wavelength Selection
PM patch cables can be manufactured for wavelengths ranging from visible laser systems to 1550 nm telecom applications.
Multiple Connector Options
FC, LC and SC connectors as well as hybrid assemblies are available.
Fully Customizable
COMNEN supports OEM customization including:
- Fiber manufacturer
- Fiber model
- Operating wavelength
- Connector type
- Cable length
- Jacket diameter
- Jacket material
- Polarization axis
- Axis orientation
- PER requirement
- Insertion-loss requirement
- Test report requirements
- Labeling and packaging
Applications
COMNEN Polarization Maintaining Fiber Patch Cables are suitable for:
- Coherent optical communication systems
- Optical transceivers and photonic modules
- Lithium-niobate optical modulators
- Fiber-optic gyroscopes
- Fiber-optic sensors
- Interferometers
- Fiber lasers
- Pump laser systems
- Optical amplifiers
- Polarization-sensitive optical components
- Optical switches
- Optical isolators
- Optical circulators
- PM fiber couplers
- Spectroscopy
- Metrology
- Laboratory laser systems
- Test and measurement equipment
- Quantum optics
- Photonic research
- Integrated optical systems
PM Fiber Patch Cable for Coherent Optical Systems
Polarization control is particularly important in coherent and phase-sensitive optical systems.
Components such as optical modulators, interferometers and coherent receivers may require light with a defined polarization state.
Using PM fiber between polarization-sensitive components can reduce unwanted polarization variation and simplify system integration.
For telecom-band systems, COMNEN can provide PM fiber assemblies optimized for 1310 nm and 1550 nm applications.
PM Fiber Patch Cable for Fiber Laser Systems
Polarization-maintaining fiber is widely used in fiber laser and pump-laser systems where stable linear polarization is required.
Available wavelengths include:
- 780 nm
- 850 nm
- 980 nm
- 1064 nm
- 1550 nm
Custom fibers can also be selected according to:
- Mode-field diameter
- Numerical aperture
- Cutoff wavelength
- Attenuation
- Beat length
- PER requirement
- Optical power requirement
PM Fiber Patch Cable for Optical Sensing and Interferometry
Interferometric systems can be extremely sensitive to polarization variation.
PM fiber helps maintain a defined polarization state, improving repeatability in applications such as:
- Fiber-optic gyroscopes
- Interferometric sensors
- Optical current sensors
- Hydrophones
- Precision metrology
- Fiber interferometers
- Scientific instruments
Standard vs. Polarization Maintaining Fiber
| Feature | Standard Single-Mode Fiber | Polarization Maintaining Fiber |
| Fiber Structure | Symmetrical SM fiber | High-birefringence structure |
| Maintains Defined Polarization | Not inherently | Yes, when correctly aligned |
| Principal Polarization Axes | Not mechanically referenced | Slow and fast axes |
| Connector Axis Alignment | Normally not required | Critical |
| Polarization Extinction Ratio | Normally not specified | Important specification |
| Typical Connector | LC/SC/FC | FC/APC commonly preferred |
| Cost | Lower | Higher |
| Telecom Transmission | Excellent | Application dependent |
| Coherent / Interferometric Systems | Limited polarization stability | Well suited |
| Fiber Gyroscope | Generally unsuitable | Widely used |
| Polarization-Sensitive Devices | Additional polarization control may be required | Preferred |
FC/APC vs. FC/UPC for PM Fiber
| Feature | FC/APC | FC/UPC |
| End-Face Geometry | Angled | Ultra-polished flat/curved interface |
| Back Reflection | Lower | Higher than APC |
| Typical Return Loss Target | ≥60 dB | ≥50 dB |
| Mechanical Thread | Yes | Yes |
| Polarization Axis Positioning | Excellent | Excellent |
| Laser Applications | Highly Recommended | Suitable |
| Interferometer Applications | Highly Recommended | Application dependent |
| Coherent Optical Systems | Recommended | Available |
| Test Equipment | Recommended | Common |
| Cost | Slightly Higher | Lower |
For most high-performance PM applications, FC/APC is the recommended configuration.
How to Select a Polarization Maintaining Fiber Patch Cable
When requesting a quotation, specify the following parameters.
1. Operating Wavelength
Example:
1550 nm
2. Fiber Type
Example:
PM Fiber Optimized for 1550 nm
3. Connector A
Example:
FC/APC
4. Connector B
Example:
FC/APC
5. Polarization Axis
Example:
Slow Axis Aligned to Connector Key
6. Required PER
Example:
≥23 dB
7. Cable Length
Example:
2 m
8. Cable Diameter
Example:
3.0 mm
9. Jacket
Example:
LSZH
10. Test Requirements
Example:
100% Insertion Loss + PER Test Report
Example Ordering Description
1550 nm Polarization Maintaining Fiber Patch Cable, FC/APC to FC/APC, Slow Axis Aligned to Key, PER ≥23 dB, 3.0 mm LSZH Jacket, 2 m
Suggested COMNEN Ordering Code
A simple ordering format can be used for OEM projects:
PMF-WL-CON1-CON2-AXIS-PER-LENGTH
Example:
PMF-1550-FCA-FCA-S-23-2M
Where:
| Code | Meaning |
| PMF | Polarization Maintaining Fiber |
| 1550 | Operating wavelength |
| FCA | FC/APC |
| FCA | FC/APC |
| S | Slow Axis |
| 23 | Minimum PER 23 dB |
| 2M | Cable length 2 meters |
Additional parameters can be added for jacket diameter and fiber model.
Quality Control and Testing
Polarization-maintaining patch cables require more precise assembly and testing than conventional single-mode patch cords.
Depending on customer requirements, COMNEN can provide inspection and testing for:
- Connector end-face quality
- Insertion loss
- Return loss
- Polarization extinction ratio
- Polarization-axis orientation
- Cable continuity
- Visual inspection
- Connector geometry
- Customized test requirements
For OEM projects, individual test data can be supplied according to the agreed manufacturing specification.
Custom Polarization Maintaining Fiber Cable Assemblies
COMNEN supports low-volume and volume production of customized PM fiber cable assemblies.
Customers can specify:
- Polarization maintaining fiber
- Specified fiber model
- Specified fiber manufacturer
- Visible / NIR / Telecom wavelength
- FC/APC or FC/UPC
- LC and SC connectors
- Hybrid connector configurations
- Bare-fiber termination
- 0.9 mm buffered fiber
- 2.0 mm cable
- 3.0 mm cable
- PVC jacket
- LSZH jacket
- Custom cable length
- Slow-axis alignment
- Fast-axis alignment
- Custom rotational alignment
- Required PER
- Required insertion loss
- Custom labels
- OEM packaging
For special optical systems, send COMNEN your required wavelength, fiber model, connector type, polarization axis, PER and cable length. Our team can configure the appropriate PM fiber assembly for your application.
FAQ
What is a polarization maintaining fiber patch cable?
A polarization maintaining fiber patch cable is a fiber-optic cable designed to preserve the polarization state of linearly polarized light when the light is launched along one of the fiber’s principal polarization axes.
PM fiber uses strong birefringence to reduce coupling between two orthogonal polarization modes.
What is high-birefringence PM fiber?
High-birefringence polarization maintaining fiber is designed to create two well-defined orthogonal polarization axes.
The controlled birefringence reduces coupling between the slow and fast axes, helping preserve the polarization state of correctly aligned input light.
What is the difference between PM fiber and standard single-mode fiber?
Standard single-mode fiber supports one spatial mode but may still allow the polarization state to change along the cable.
PM fiber is specifically designed to minimize coupling between orthogonal polarization states.
Therefore, single-mode and polarization maintaining describe different optical characteristics.
Does PM fiber create polarized light?
No.
PM fiber is primarily designed to maintain a polarization state rather than generate one.
The input light should already have a defined polarization state and should be correctly aligned with the slow or fast axis.
What does slow axis mean?
PM fiber contains two orthogonal principal axes.
Light polarized along one axis experiences a slightly higher effective refractive index and therefore propagates more slowly. This axis is called the slow axis.
The perpendicular axis is called the fast axis.
Which axis is aligned with the FC connector key?
For standard COMNEN PM patch cables, the slow axis is aligned with the connector key.
Fast-axis or custom-angle configurations can be manufactured upon request.
Why is FC/APC commonly used for PM patch cables?
FC connectors provide threaded coupling and good rotational positioning.
FC/APC additionally uses an angled optical end face to reduce optical back reflection, making it suitable for lasers, interferometers and other reflection-sensitive optical systems.
What is polarization extinction ratio?
Polarization Extinction Ratio, or PER, describes the ratio between optical power in the desired polarization axis and optical power coupled into the unwanted orthogonal axis.
PER is expressed in decibels.
Higher PER generally indicates better preservation of the intended polarization state.
What PER can COMNEN provide?
Standard products can be specified at ≥20 dB, with higher-PER versions such as ≥23 dB or ≥25 dB available depending on the selected fiber, wavelength, connector configuration and project requirements.
Can COMNEN provide 1550 nm PM fiber patch cables?
Yes.
1550 nm PM fiber cable assemblies can be manufactured with connector options including FC/APC and FC/UPC for telecom, coherent optical, interferometric and measurement applications.
Can COMNEN provide 980 nm or 1064 nm PM patch cables?
Yes.
PM cables optimized for 980 nm and 1064 nm can be manufactured for pump lasers, fiber lasers, optical amplifiers and related photonic applications.
Can you manufacture hybrid PM patch cables?
Yes.
Examples include:
- FC/APC to LC/APC
- FC/APC to SC/APC
- FC/APC to FC/UPC
- Connector to bare fiber
- Customer-defined connector combinations
Can a specific PM fiber brand or model be used?
Yes, subject to material availability.
Customers may specify the PM fiber manufacturer or exact fiber model when a project requires particular characteristics such as:
- Mode-field diameter
- Numerical aperture
- Beat length
- Cutoff wavelength
- Attenuation
- Bend sensitivity
- Coating diameter
- PER
Polarization Maintaining PM Fiber Patch Cable, FC/APC FC/UPC LC/SC, 405–1550nm Datasheet



