COMNEN’s Cat6 snagless flat patch cable are similar to standard Cat6 flat patch cable, but with the addition of a “snagless” feature. The snagless design protects the clip on the RJ45 connector from damage during installation or removal of the cable. This is achieved by encasing the clip in a protective boot, which prevents it from catching on other cables or components as it is pulled through tight spaces or unplugged from a port. The flat design of the cable makes it easier to route and organize than round cables, while the Cat6 standard provides higher performance in terms of bandwidth and signal-to-noise ratio. These cables are commonly used in home and office networking setups to connect devices such as computers, routers, and switches to a local area network (LAN) or the internet. Compliant with RoHS, REACH and CE, come with COMNEN lifetime long warranty. ODM or EOM service is available.
Physical Characteristics
• Cable Type – Cat6 UTP
• Connector Type(s) – RJ45 Male
• Wiring Scheme – T568A or T568B
• Temperature Rating – -20°C to +75°C
• Voltage Rating – 30V
———————————————————————————————————————————————
Conductor (Qty. 4 twisted pair)
• Conductor Type – 32AWG (7/0.08), Bare Copper
• Insulation – HDPE
• Dimeter – 0.75±0.05mm
• Pair Identification:
• Pair1=Orange, Orange-White
• Pair2=Blue, Blue-White
• Pair3=Green, Green-White
• Pair4=Brown, Brown-White
Connector Type (Qty. 2)
• Connector Type – Unshielded 8P8C (RJ45)
• Gender – Male
• Connector Material – PC
• Contact Material – Copper Alloy, Gold Plating – 1/3/…/50µm
• Boot Material – PVC
Overall Cable
• Jacket – PVC/LSZH
• Minimum Average Thickness – 1.5mm
• Outer Diameter – 6.0*1.5mm
———————————————————————————————————————————————
Electrical Characteristics
• Conductor DC Resistance – 58.3Ω/100m (maximum)
• Impedance – 100Ω
• Capacitance – 5600pf/100m
• Propagation Delay – 545ns/100m (maximum)
• Delay Skew – 45ns/100m (maximum)
———————————————————————————————————————————————
Product Application
• Horizontal networks installation
• Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.
Cat6 UTP Snagless Flat Patch Cable Datasheet
Cat6 UTP Snagless Flat Patch Cable Drawing