Gigabit Unshielded Cat6 Flat Patch Leads UTP Flat RJ45 Ethernet Cable Blue Color 0.1m 0.3m 0.5m

COMNEN’s Cat6 flat patch leads, also known as Ethernet patch cables, are network cables used to connect devices such as computers, routers, and switches to a local area network (LAN) or the internet. The “Cat6” designation indicates that these cables meet the Category 6 standard, which specifies a higher level of performance in terms of bandwidth and signal-to-noise ratio than earlier categories such as Cat5e. The “flat” design of these cables means that they have a thinner profile and are easier to route and organize than round cables. These patch leads typically have RJ45 connectors on both ends and come in various lengths to accommodate different networking setups. Compliant with RoHS, REACH and CE, come with COMNEN lifetime long warranty. ODM or EOM service is available.

Physical Characteristics

• Cable Type – Cat6 UTP
• Connector Type(s) – RJ45 Male
• Wiring Scheme – T568A or T568B
• Temperature Rating – -20°C to +75°C
• Voltage Rating – 30V

———————————————————————————————————————————————

Conductor (Qty. 4 twisted pair)

• Conductor Type – 32AWG (7/0.08), Bare Copper
• Insulation – HDPE
• Dimeter – 0.75±0.05mm
• Pair Identification:
• Pair1=Orange, Orange-White
• Pair2=Blue, Blue-White
• Pair3=Green, Green-White
• Pair4=Brown, Brown-White

Connector Type (Qty. 2)

• Connector Type – Unshielded 8P8C (RJ45)
• Gender – Male
• Connector Material – PC
• Contact Material – Copper Alloy, Gold Plating – 1/3/…/50µm
• Boot Material – PVC

Overall Cable 

• Jacket – PVC/LSZH
• Minimum Average Thickness – 1.5mm
• Outer Diameter – 6.0*1.5mm

———————————————————————————————————————————————

Electrical Characteristics

• Conductor DC Resistance – 58.3Ω/100m (maximum)
• Impedance – 100Ω
• Capacitance – 5600pf/100m
• Propagation Delay – 545ns/100m (maximum)
• Delay Skew – 45ns/100m (maximum)

———————————————————————————————————————————————

Product Application

• Horizontal networks installation
• Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.