800G OSFP to 2x400G QSFP112 Breakout Active Copper Cable (ACC)
COMNEN’s 800G OSFP to 2×400G QSFP112 Breakout Active Copper Cable (ACC) is a high-performance interconnect solution designed for next-generation data centers and AI-driven networks. It enables a single 800G OSFP port to split into two 400G QSFP112 connections, maximizing port flexibility and optimizing bandwidth utilization. With integrated active components, this cable ensures enhanced signal integrity and extended reach compared to passive solutions, making it ideal for medium-range, high-speed connections within racks or between adjacent racks.
Built with advanced PAM4 signaling technology, the ACC supports reliable 800G to dual 400G data transmission while maintaining low latency and consistent performance. Its active design incorporates signal conditioning and equalization to minimize insertion loss, crosstalk, and electromagnetic interference, ensuring stable operation even in demanding, high-density environments. The durable construction, combined with precision-engineered connectors, delivers long-term reliability and superior mechanical performance.
Fully compliant with OSFP and QSFP112 MSA standards, this breakout ACC offers broad compatibility with leading switches, servers, and networking platforms. The plug-and-play design allows for quick and easy deployment without additional configuration, reducing installation time and operational complexity. Ideal for hyperscale data centers, cloud infrastructure, and high-performance computing clusters, the 800G OSFP to 2×400G QSFP112 ACC provides a scalable, energy-efficient, and cost-effective solution for modern high-speed networking.
| Compatible | Generic | Vendor Name | COMNEN |
| Max Data Rate | 800Gbps | Form Factor | OSFP to 2*QSFP112 |
| Wire AWG | 30/28/26AWG | Conductor | Copper |
| Cable Type | Acive Twinax | Minimum Bend Radius | 30mm |
| Temperature Range | 0 to 70°C (32 to 158°F) | Jacket Material | PET |
| Modulation Format | PAM4 | Protocols | OSFP MSA, IEEE 802.3ck, CMIS v5.0 |
| Power Consumption | <0.15W | Cable Length | 0.5m~3m |
| Power Supply | 3.3V | Application | 800G Ethernet, IB NDR, AI Center |
| Compliant | RoHS | Warranty | 5 Years |
Key Benefits for AI & Hyperscale Data Center Networking
In the context of 800G networking, the 800G OSFP to 2x400G QSFP112 ACC (Active Copper Cable) is not just a cable—it is a strategic component for scaling AI clusters.
For AI and Hyperscale environments, the benefits focus on three pillars: Link Distance, Thermal Efficiency, and Cost-to-Performance Ratio.
1. Extended Reach for AI Clusters (The 3m–5m “Sweet Spot”)
In modern AI data centers, GPUs are often spread across multiple adjacent racks to manage power density.
The DAC Limitation: Passive Copper (DAC) loses signal integrity beyond 2.5–3 meters at 112G PAM4 speeds.
The ACC Solution: By integrating a Linear Redriver, ACCs extend the reach up to 5 meters. This allows for “Middle-of-Row” or “End-of-Row” switching architectures that are impossible with standard DACs.
2. Superior Thermal and Airflow Management
AI servers (like NVIDIA DGX platforms) generate immense heat. Airflow is critical.
Thinner Gauge: Because ACCs use active signal boosting, they can use thinner copper wires (higher AWG) than DACs of the same length.
Reduced Bulk: Thinner cables mean less congestion in the back of the rack, allowing for better cold-aisle to hot-aisle airflow, which directly impacts the longevity of high-end GPUs and switches.
3. Lower TCO (Total Cost of Ownership) vs. Optical
While AOCs (Active Optical Cables) can reach further, they come with higher costs and power penalties.
Power Consumption: ACCs typically consume less than 1.0W per end, significantly lower than 800G Transceivers or AOCs (which can exceed 14W+ per link). Over a cluster of 10,000 nodes, this leads to massive savings in electricity and cooling costs.
Latency: ACCs offer near-zero latency compared to some optical solutions that require FEC (Forward Error Correction) processing, which is vital for latency-sensitive AI training workloads.
4. High-Density Breakout Efficiency
The 800G to 2x400G configuration is the “Gold Standard” for port density.
Port Maximization: It allows a single 800G switch port (OSFP) to serve two 400G network interfaces (QSFP112) on servers.
Standard Alignment: Using QSFP112 ensures that the 400G side matches the latest 112G Lane speed, preventing the “speed mismatch” bottlenecks found in older QSFP56-based systems.
| Feature | Passive DAC | Active ACC (COMNEN) | Active AOC / Optical |
| Max Reach | Up to 2.5m | Up to 5m | Up to 100m+ |
| Power Use | ~0W | < 1.5W | 10W – 16W+ |
| Cable Diameter | Thick/Rigid | Thin/Flexible | Very Thin |
| Cost | Lowest | Medium (Optimal) | High |
| Best Use Case | Intra-Rack | Inter-Rack / AI Clusters | Long Span / Core |
Featurs
- Compatible with IEEE802.3ck
- Supports aggregate data rates of 2X400Gbps(PAM4)
- Optimized construction to minimize insertion loss and crosstalk
- Pull-to-release slide latch design
- Straight and breakout assembly configurations available
- Customized cable braid termination limits EMI radiation
- Customizable EEPROM mapping for cable signature
- 26AWG and 28AWG cable
- 3.3V power supply
- Low power Consumes 0.15W per active channel, the total power of the cable is 2.5W
- EQ programmable
- Temperature Range:0~70°C
OSFP to 2*QSFP112 ACC Specifications
- Number of Lanes: Tx8 & Rx8(OSFP)
- Tx4 & Rx4(QSFP112)
- Channel Data Rate: 106.25Gbps
- Operating Temperature: 0 to + 70°C
- Storage Temperature: -40 to + 85°C
- Supply Voltage: 3.3 V nominal
- Electrical Interface: 76pins edge connector(QSFP-DD)
- 38pins edge connector(QSFP112)
- Management Interface: Serial, I2C
Applications
- Switches, servers and routers
- Data Center networks
- Storage area networks
- High performance computing
- Telecommunication and wireless infrastructure
- Medical diagnostics and networking
- Test and measurement equipment