16-Fiber OS2 MPO 2×2 Shuffle Trunk Cable
The COMNEN 16-fiber OS2 MPO shuffle trunk cable is a configurable passive fiber assembly with 2 MPO-8 APC female connectors at each end. Its Type 2 shuffle arrangement redistributes optical lanes according to a defined connection map. Provide a compact 2×2 shuffle section between patching interfaces in an AI cluster or HPC rack.
The OS2 single-mode configuration uses 9/125 μm fiber for single-mode optical links. Select the cable length, jacket construction and breakout routing to match the installation. A shuffle assembly routes existing lanes; it does not convert protocols, create bandwidth or provide optical splitting.
Technical Specifications
| Parameter | Specification / Options |
|---|
| Brand | COMNEN |
|---|
| Product family | MPO Shuffle Trunk Cable |
|---|
| Suggested product SKU | KNFPC2XMPO8OS2001SH2FT |
|---|
| Fiber count | 16 active fibers; 2 groups of 8 fibers |
|---|
| Fiber type | OS2 single mode, 9/125 μm; G.657.A1, compatible with G.652.D |
|---|
| Connector A | 2 × MPO-8 APC Female (unpinned) |
|---|
| Connector B | 2 × MPO-8 APC Female (unpinned) |
|---|
| Polish | APC, nominal 8°; APC-to-APC mating only |
|---|
| Shuffle topology | Type 2 / 2×2 family; exact pin-to-pin mapping defined by the approved drawing |
|---|
| Mapping identification | Record connector IDs, fiber positions, key orientation and Tx/Rx routing; not interchangeable with standard Type A/B/C polarity labels |
|---|
| Connector insertion loss | Low-loss acceptance target: ≤0.35 dB per specified mated interface; measurement reference to be agreed |
|---|
| Return loss | ≥60 dB target |
|---|
| Test wavelengths | 1310 / 1550 nm |
|---|
| Fiber attenuation target | ≤0.35 dB/km at 1310 nm; ≤0.21 dB/km at 1550 nm |
|---|
| Length options | 5 m, 7 m, 8 m, 10 m, 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m, 55 m, 60 m, 65 m, 70 m, 100 m; other lengths by quotation |
|---|
| Length definition | Connector-tip to connector-tip; main trunk and breakout lengths separately stated on the drawing |
|---|
| Outer jacket / fire rating options | LSZH compound or OFNP-rated plenum construction; specify one when ordering |
|---|
| Jacket selection note | OFNP is a fire classification, not a polymer name; actual compound and compliance evidence to match the purchase specification |
|---|
| Reference jacket color | Yellow; project-specific identification by request |
|---|
| Cable diameter | 9.0 mm nominal |
|---|
| Breakout leg diameter | 3.0 mm nominal; final construction per drawing |
|---|
| Breakout length | 0.8 m reference breakout; custom lengths subject to routing review |
|---|
| Installation bend radius | Assembly-specific static and dynamic limits to be confirmed; do not use bare-fiber bend values as cable-installation limits |
|---|
| Tensile load target (long / short term) | 200 / 660 N |
|---|
| Operating temperature target | LSZH: -20°C to +70°C; OFNP: 0°C to +70°C |
|---|
| Storage temperature | Target: LSZH -40°C to +85°C; OFNP -10°C to +85°C |
|---|
| Application interface | 400G / 800G parallel-optics system designs where connector, fiber, lane map and channel-loss budget match |
|---|
| MTP® connector option | Request separately if genuine US Conec MTP® connectors are required; the base configuration is MPO |
|---|
| Order documentation | Approved routing drawing, connector gender/keying specification and agreed optical test report requirements |
|---|
Applications and Interface Selection
- MPO panel and harness interconnection with a compact shuffle trunk.
- AI training and HPC fabrics requiring a documented optical lane arrangement.
- Multi-plane switch and NIC cabling where the physical mapping matches the configured port breakout mode.
400G and 800G describe the connected optical systems, not a universal cable speed or reach rating. Confirm the exact transceiver part numbers, wavelength, OS2 fiber requirement, connector keying, pin arrangement and optical budget before selection. Cable order length is not a guaranteed transmission distance. MPO-8 means eight active fibers here; confirm the ferrule positions and mating interface against the equipment drawing.
Pinned male cable ends require compatible unpinned mating interfaces; verify this before connecting equipment. Do not mate APC with UPC endfaces. A passive shuffle does not itself configure or balance network traffic.
Configuration and Ordering
Quote product reference KNFPC2XMPO8OS2001SH2FT with the required length, LSZH or OFNP construction, quantity, end-A/end-B port list and shuffle drawing revision. Include breakout leg lengths, labels and any installation pulling arrangement. Length and jacket remain selectable specifications and are intentionally excluded from the product title.
For project acceptance, specify optical insertion/return-loss measurements, endface inspection and full continuity/pin-map verification. Request the applicable jacket fire-test documentation and material declarations for the selected build. Dimensions and performance values in this configuration are quotation targets and must be confirmed in the approved COMNEN order specification.
Frequently Asked Questions
Is Type 2 the same as Type B polarity?
No. Type 2 identifies the referenced shuffle family. Use the approved fiber-by-fiber map to establish polarity, connector orientation and lane routing.
Can length and jacket be customized?
Specify a listed length or request a project length. Select LSZH or an OFNP-rated construction and confirm the cable geometry, installation limits and required supporting documents before production.