Tag Archives: cat6

What is and how to make a Ethernet crossover cable? Any Ethernet cable is built must under the standards of TIA/EIA (Telecommunications Industry Association/Electronic Industries Association), for connecting RJ45 ports with twisted pairs cable, TIA/EIA standards stipulate two wire turns of twisted pair, that is T568B and T568A. Wiring of T568B: white/orange–1,orange–2,white/green–3,blue–4,white/blue–5,green–6,white/brown–7,brown–8; Wiring of T568A: […]

Why COMNEN’s RJ45 Ethernet flat network patch cable? Flat Ethernet cables are become more and more popular, not only they can provide Gigabit even 10Gigabit data transmission but also for its great convenience-easy to run cabling in a limited space:under the carpets, over the wall,behind the furniture,narrow cabinet…           Flat Ethernet cables include […]

As a Ethernet network patch cable manufacturer in China, Comnen devoted itself in designing and developing high quality and performance patch cords to meet the high speed commercial and residential structured Ethernet network cabling. Design, develop and produce Ethernet Network Patch Cables. Including Cat7, Cat6a, Cat6, Cat5e, Cat5, Cat3, 110 Patch cables. Shielded(SSTP, SFTP, S/FTP) […]

With the application and development of the Ethernet and enterprise network all over the world, the financial industry and electronic network information deep construction in our country, increasingly diversified service means, based on the computer, a lot of new business appear constantly, and gradually formed a complete set of modernization new model. The integrated cabling system plays a […]

Many clients ask us what the difference between solid and stranded cable.today,Comnen engineer will tell you the difference. No matter if your cable is Cat3, Cat5, Cat5e, Cat6 or Cat6a rated, it is also classified as either “solid” or “stranded”.A solid cable is most commonly used as a backbone cable in walls,ceilings and conduit, where […]

ANSI/TIA/EIA-568-B The latest standard published by TIA is the ANSI/TIA/EIA 568-B standard. It is a revision of the ANSI/TIA/EIA-568-A that was published in 1995. It includes the core document, all five existing addenda and TSB-67, TSB-72, TSB-75 and TSB-95. This standard is published as a 3-part document: The TIA/EIA 568-B.1 draft discusses general requirements. It provides information in regards to […]

New materials RJ45 connectors: Nylon RJ45 connectors Today we are so excited to announce our new materials RJ45 connectors: Nylon RJ45 Connectors. After have being R&D for one and an half years, Comnen Technology engineers finally worked it out. These kind of nylon plugs also come with utp(unshielded)and ftp(shielded), bellow are the pictures of these […]

Today we are going to learn how to crimp RJ45 connectors with a lan cable, Comnen’s engineer will introduce the easiest and most reliable way for you. Step 1 Choose your cable and the right RJ45 connectors First of all, you should confirm the cable and connectors are the same category, means cat5e cable couple […]

CAT6a is the newest type of Ethernet cabling that you can install for your network. It is an improved version of the CAT6 cabling and offers better performance. Cabling is a little bit more complicated as their capacities are also a function of the length that is used. CAT6 cables are rated at 1Gbps while […]

Introduction of Network Patch Panel’s installation Network Patch Panels are widely used in the Ethernet cabling installation, the main function of patch panel is to make network cabling neat and beautiful, and the line orderly, and to facilitate future maintenance. Installation procedure is mainly the following three steps: Step 1 The connection to the host […]

  • 1
  • 2