10G Slim Cat6a Network Patch Cable
Bandwidth:500MHz
Conductor:32AWG
Appravals:RoHS&REACH
Length,Color,Package:As per your request
Comnen’s Slim Flat Cat6a Network Patch Cord makes network cabling easier in a limited tight space where typical patch cords are too bulky. The typical patch cord’s thickness usually is 6.0mm, but our flat cat6a network patch cable’s is 2.2mm, this can help cabling save 2/3 space directly. At the same time, it’s easy for this slime cat6a patch cable to transmit data at the speed of 10G BASE-T, and tested to meet all category 6a standards. Composed of high performance 50micron gold plated RJ45 modular plugs on each end, and 4p individually foil shielded 32AWG(7/0.08mm) stranded pure bare copper conductor wires.
- High speed up to 500MHz
- 32 AWG Bare copper shielded 4 pair wires
- 50u micron gold plated connectors
- Save 2/3 space than normal cable
- Lengths/colors/packaging as to your request
Physical Characteristics
•Cable Type – Cat6a SSTP Flat
•Connector Type(s) – RJ45
•Wiring Scheme – T568A or T568B
•Temperature Rating – -20°C to +75°C
•Voltage Rating – 30V
———————————————————————————————————————————————
Conductor (Qty. 4 twisted pair)
• Conductor Type – 32AWG(7/0.08), Stranded Bare Copper
• Insulation – HDPE
• Dimeter – 0.55±0.05mm
• Pair Identification:
• Pair1=Orange, Orange-White
• Pair2=Blue, Blue-White
• Pair3=Green, Green-White
• Pair4=Brown, Brown-White
Connector Type (Qty. 2)
• Connector Type – Shielded 8P8C (RJ45)
• Gender – Male
• Connector Material – PE
• Contact Material – Copper Alloy, Gold Plating – 50µm
• Hood Material – Molded PVC
Overall Cable
• Jacket – PVC/LSZH
• Minimum Average Thickness – 2.20mm
• Outer Diameter – 7.20 *2.20± 0.30mm
———————————————————————————————————————————————
Electrical Characteristics
• Conductor DC Resistance – 9.38Ω100m (maximum)
• Impedance – 100Ω
• Capacitance – 5600pf/100m
• Propagation Delay – 545ns/100m (maximum)
• Delay Skew – 45ns/100m (maximum)
———————————————————————————————————————————————
Product Application
• Horizontal networks installation
• Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.
Comments or questions are welcome.
