• mini-cat6a-patch-cables
  • cat6a-mini-patch-cable
  • mini-booted-cat6a-patch-cable
  • shielded-mini-cat6a-patch-cable
  • mini-cat6a-booted-patch-cable
  • mini-shielded-cat6a-patch-cable

Shielded Mini Cat6a Booted Patch Cable

Bandwidth:600MHz
OD:4.0mm
Conductor:36AWG
Appravals:RoHS&REACH
Connector: 50U" gold plated RJ45 connector

COMNEN’s new developed double shielded SSTP Mini Cat6a Ethernet Patch Cable with great progress in cable’s diameter, its OD is 4.0±0.15mm. Its a great solution for narrow or limited space to run 10Gigabit network cabling. This patch cord tested to meet all standards of Cat 7, speed up to 600MHz, and 15 m/50 ft successfully pass Cat6a Fluke Channel Test. Component with 36AWG(7/0.05mm bare copper) conductors, and 2 gold plated shilded short body RJ45 8p8c connectors, shielded with double Al-foil, TPE jacket/LSOH(PVC also is available). Used to connect with a variety of modem, DSL modem, router, hub, patch panel, or other network-enabled device. Comes with COMNEN’s lifetime long warranty.

  • Small OD 4.0mm±0.15mm
  • Snagless design protects clips when plugging and unplugging
  • 50micron gold plated rj45 plugs on each end
  • High speed up to 600MHz
  • Available in any color to color-code a network
  • Lengths as to your request

Physical Characteristics

•Cable Type – Cat6a SSTP
•Connector Type(s) – RJ45
•Wiring Scheme – T568A or T568B
•Temperature Rating – -20°C to +60°C
•Voltage Rating – 30V

———————————————————————————————————————————————

Conductor (Qty. 4 twisted pair)

• Conductor Type – 36AWG(7/0.05), Stranded Bare Copper
• Insulation – HDPE
• Dimeter – 0.55±0.05mm
• Pair Identification:
   • Pair1=Orange, Orange-White
   • Pair2=Blue, Blue-White
   • Pair3=Green, Green-White
   • Pair4=Brown, Brown-White

Connector Type (Qty. 2)

• Connector Type – Shielded 8P8C (RJ45)
• Gender – Male
• Connector Material – PC
• Contact Material – Copper Alloy, Gold Plating – 50µm
• Hood Material – Molded PVC

Overall Cable 

• Jacket – PVC/TPE
• Minimum Average Thickness – 0.60mm
• Outer Diameter – 4.0 ± 0.15mm

———————————————————————————————————————————————

Electrical Characteristics

• Conductor DC Resistance – 153Ω/100m (maximum)
• Impedance – 100Ω
• Capacitance – 5600pf/100m
• Propagation Delay – 545ns/100m (maximum)
• Delay Skew – 45ns/100m (maximum)

———————————————————————————————————————————————

Product Application

• Horizontal networks installation
• 10Gigabit; 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels etc.

Comments or questions are welcome.

* indicates required field