• COMNEN-neutrally-buoyant-float-tether-ethernet-cable-PATCH-CORD-1
  • COMNEN-CAT5E-SHIELDED-neutrally-buoyant-float-tether-ethernet-cable-PATCH-CORD

Neutrally (positive) buoyant float Slim Flexiable Lightweight shielded ROV underwater tether cable 328 feet (100m)

Foamed polyurethane outer jacket to provide buoyancy
Neutrally buoyant in fresh water, slightly buoyant in salt water
Kevlar strength member to provide additional strength
Customized pairs/conductors/connectors/length/shielded

This professional-grade neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications.

This high-performance, low-drag tether is less than 4mm/7mm in diameter and has 2pairs/4 pair of wires.Power can be supplied as a common-mode signal over two or more of the differential pairs of wires found in the Cat5e Ethernet cables and comes from a power supply within a PoE-enabled networking device such as an Ethernet switch or can be injected into a cable run with a midspan power supply. A polyurethane foam jacket makes it rugged and abrasion resistant. It’s perfect for travel, deep dives, and long-distance dives.

Neutrally (positive) buoyant float Slim Flexiable Lightweight shielded ROV underwater tether cable 328 feet (100m)

Neutrally (positive) buoyant float Slim Flexiable Lightweight shielded ROV underwater tether cable 328 feet (100m)

  • Foamed polyurethane outer jacket to provide buoyancy
  • Neutrally buoyant in fresh water, slightly buoyant in salt water
  • Kevlar strength member to provide additional strength
  • High visible yellow color to see it through the water
  • No inherent twisting of wire, so less likely to get tangled
  • Diameter: 7mm /4mm
  • Break strength: 500 N
  • Shield: FTP / UTP
  • Outer Jacket: Foamed polyurethane
  • Wires: 4 pairs / 2 pairs 24 AWG bare copper
  • Minimum Bend Radius:  35mm / 20mm

Comments or questions are welcome.

* indicates required field