Customized WB MMF OM5 Multimode Wideband LC/SC/FC/ST Duplex Fiber Optic Patch Cord Cable

Connector Type: LC/SC/ST/FC
Polish Type: UPC/APC to UPC/APC
Fiber Mode: OM5 50/125μm
Wavelength: 850/953nm
Fiber Count: Duplex/Simplex
Cable Diameter: 2.0/3.0mm
Cable Jacket: PVC/LSZH/OFNP
Jacket Color: Lime Green

SKU: KNFOPCOM5 Category:

1. OM5 is designed to support at least four low-cost wavelengths in the 850-953 nm range, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s and 100 Gb/s and reduced fiber counts for higher speeds.

2. OM5 cabling supports all legacy applications at least as well as OM4, and is fully compatible with OM3 and OM4 cabling. OM5 is the new approved designation for WB MMF.It is compliant with OM4 specifications at 850 nm, but includes additional bandwidth characterization at 953 nm to support extended distances when using SWDM.

3. The expected operation distances are given in the table below.  To date, 40/100GbE SWDM has focused
on providing an upgrade path over legacy brownfield OM3/OM4 installations.  OM5 may be used when the
expected distance range is > 100 m when using 100G SWDM (4 x 25G optical lanes).

Table: Operation distances for OM3/OM4/OM5

COMNEN-OM5-OM4-OM3-comparison

More information of OM5 fiber optic patch cables,please visit our blog.

  • Connector Type: LC/SC/ST/FC;
  • Polish Type: UPC/APC to UPC/APC;
  • Fiber Mode: OM5 50/125μm;
  • Wavelength: 850/953nm
  • Fiber Count: Duplex;
  • Fiber Grade: G.651;
  • Insertion Loss: ≤0.3dB;
  • Return Loss: ≥20dB;
  • Attenuation at 850nm: 2.4 dB/km;
  • Attenuation at 953nm: 1.7 dB/km;
  • Minimum Bend Radius: 30mm;
  • Cable Diameter: 2.0/3.0mm;
  • Cable Jacket: PVC/LSZH/OFNP;
  • Jacket Color: Lime Green;
  • Polarity: A(Tx) to B(Rx);
  • Operating Temperature: -60~75°C;

Comments or questions are welcome.

* indicates required field