100% Fluke Component Level Tested! UTP Cat6 Ultra Thin Patch Cable

Fluke Component Level Tested !!! Ultra Thin OD:3.5mm UTP CAT6 Patch Cable for Data Center

Comnen’s Cat6 Snag-free Unshielded (UTP) ultra-thin Network Patch Cable is the perfect solution for high density datacenter applications. Use of 28 AWG wire provides a 42% reduction in diameter over a standard Cat6a network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6a cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels.

This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a white, blue, green, yellow and red or your request to easily color-code your network installation.

Super Sell Points:

  1, OD at:3.5mm. It is 58% size of normal patch cord.

  2, Better airflow & cooling performance in server & switch racks

  3, Ultra-soft&Ultra thin for Space-saving & Cost-effective

Wiring Scheme

1，ANSI/TIA/EIA-568-C.2: T568A & T568B

2，ISO/IEC 11801: 8-position conductor/pair assignment (1-2/3-6/4-5/7-8)

Conductor Details:

Construction: 4 pairs, 7 strandsed oxyge-free copper,28 AWG, UTP CAT.6

Outer Cable Diameter: 3.5mm ± 0.2 mm

Outer Jacket: PVC/LSZH Jacket

Plug Details:

Type:Unshielded RJ45 8P8C CAT6 Modular Plug

Housing: UL listed 94V-0/1/2 flame retardant polycarbonate

IDC blades: phosphor bronze, gold plating over 100 μin of nickel in contact area

Electric Property:

Test: Pass Fluke Cat6 Component test. Pass Fluke Cat6A Channel Test.

Retention: 50 N (11 lbf) for 60±5 s             Installation Temperature: 0°C to +60°

Mating cycle life: min 750 cycles                Operating temperature: -20°C to +60°C

Tensile strength: ≥ 20 N per wire               Minimum bend radius: 4 outer cable diameters